Changing The Video With A Cut - Sony AWS-G500 Operating Instructions Manual

Changing the Video With a Cut

Basic operation for a video cut
Switching directly by pressing a PGM selection button
78 Video Switching
This switches the video instantaneously, with no added effects. This is the most
basic form of switching.
There are two methods of making a cut, as follows.
• Switching directly by pressing a PGM selection button
• Checking the next video in the PVW viewer, then pressing the CUT button
The following diagram shows the flow of operations in carrying out a video cut.
Press the PGM selection buttons to select the program
output video.
Press a different PGM
selection button to
switch the video.
To switch from one video to another, you can simply press the PGM selection
button to which the new video is assigned.
1
In the source viewer, select the video for program output.
2
Press the PGM selection button with the same number as the selected video.
1 2 3 4
The PGM selection button you pressed lights red, and the selected video
appears in the PGM viewer.
The same video as shown in the PGM viewer is now output from the PGM
output connectors.
Press a NEXT selection
button to select the next
output.
Press the CUT button.
Example: You may select video 4.
Press button 4.
PGM
NEXT
5 6
INT