Table of Contents
Advertisement
Basic operation for luminance keying
100
Video Switching
Notes
• Pressing the KEY button switches to key mode (the KEY button, NEXT
selection buttons, MIX button or EFFECT button light green, and the AUTO
TRANS button, CUT button, and transition lever now apply a keying
operation).
• You can also register graphics files to the numeric buttons on the front panel
and access them whenever necessary. For details, see "Accessing Graphics
Files Quickly" (page 94).
The basic procedure for luminance keying is as follows.
Press the KEY button (Switches to key mode).
Select the key video with a NEXT selection
button.
Select [Luminance Key] for [Key Type] in the
top menu.
Select the effect pattern with the MIX button
or EFFECT button.
Adjust the key video.
Carry out the transition.
1
Press the KEY button.
The KEY button, NEXT selection buttons, and the MIX or EFFECT button
light green and are now used for video keying.
2
Select the video for keying by pressing the NEXT selection button assigned
to it.
A green frame appears around the selected video in the source viewer.
3
Press the MENU button.
4
In the top menu, select [Video Effect].
When 5 is selected
Advertisement
Table of Contents
