Table of Contents
Advertisement
Upgrading the Operating Software
Information on upgrades
Upgrade procedure
270
Maintenance
This section describes how to upgrade when there are improvements to the
operating software and hardware firmware.
Caution
When the external hard disk is connected to the unit, always disconnect it before
upgrading the operating software.
Information on software upgrades is available from the Anycast Station portal
site operated by Sony.
The following site also provides links to the portal site and information on
upgrades.
https://servicesplus.us.sony.biz/SoftwarePlusSerch.aspx (for customers in
U.S.A.)
https://www.sonybiz.net/anycast (for customers in Europe, Middle East and
Africa)
https://www.ecspert.sony.biz/ecsite/ (for the other customers)
Download to a "Memory Stick" or USB flash memory.
1
Insert a "Memory Stick" or USB flash memory holding the installation
program in the "Memory Stick" slot or USB connector on the side panel.
Caution
Before carrying out the following operation, plug the device into the
"Memory Stick" slot or USB connector used for installation only, and
remove other devices.
2
Press the 1 (power) button on the side panel.
This powers on the unit.
FACTORY USE
8
1
15
9
RESET
1 (power) button
"Memory Stick" slot
REMOTE
NETWORK
5
1
9
6
(
)
RGB
GUI
USB
USB connector
Advertisement
Table of Contents
