Table of Contents
Advertisement
Using the timer to shut down the system/Releasing the timer setting
This closes down the operating software, and powers off.
It takes a little while before the power turns off after the screen disappears.
Caution
• If you hold down the power button for at least 4 seconds, this forces a
shutdown. After a forced shutdown, the settings of the unit may not be
preserved.
• When restarting the unit immediately after shutting down, wait at least 5
seconds after shutdown before pressing the power button.
• Button operations performed while an application is closing will not be
properly reflected on the system.
You can use a timer to shut down the unit.
Caution
Do not shut down the system using the timer while recording to an external hard
disk. The recorded file may become damaged and unusable.
1
While the Anycast Station main software is running, hold down the keyboard
Alt and Ctrl keys, and press the T key.
The following confirmation message appears.
Note
It is not possible to use this function while the Text Typing Tool software is
running.
2
To set the timer, press the ENTER button.
To release the timer, press the ESC button.
When setting the timer
The timer indication appears to the right of "LOCAL TIME."
When the text entry tool is started, the timer display disappears, but the timer
function continues to operate.
Note
The countdown appears from -120 min.
After two hours the system is powered off.
When releasing the timer
The timer display disappears.
Installation/Default Settings
49
Advertisement
Table of Contents
