Table of Contents
Advertisement
Recorded settings and file details
Starting recording of material
Recorded settings
Video
ACCESS menu settings (Adjustment is not possible for DV video)
ACCESS menu [Input Trim] setting (analog audio only)
Audio
Top menu [Audio MIC/LINE Level] setting
File details
File name
YYMMDD-(source number)–(3-digit suffix) (.avi)
File format
DV format (.avi)
Signal format
Same as the setting of [PGM OUT] of [Video Output] in the top menu.
(NTSC/PAL)
Timecode
DV material
Non DV material System timecode (page 54)
1
Configure the settings in "Preparing for Recording to an External Hard Disk"
(page 174).
2
Select the source to be recorded in the NEXT selection buttons.
Caution
The inputs that can be recorded are only those to the interface module to
which the external hard disk is connected (inputs for which the source viewer
shows the hard disk number and recording status).
3
Hold down the REC button and press the PLAY button.
PLAY button
The source viewer device status shows "REC PAUSE."
The following confirmation message also appears at the same time.
The timecode included with DV material is recorded.
MENU
X - Y
REC button
REC
SHIFT
Recording Video and Audio to an External Hard Disk
179
Advertisement
Table of Contents
