Sony AWS-G500 Operating Instructions Manual page 21

SHIFT + jog dial Aperture (iris) adjustment on
camera with VISCA support
SHIFT + numeric • Set camera presets
buttons (1 to 6) • Register hard disk and
VCR cue-up points
SHIFT + numeric • Register quick access
buttons (1 to 9) graphics files
• Register video effect
snapshots
SHIFT + numeric Camera reset
buttons (0)
SHIFT + numeric Register a start point for auto
buttons (8) repeat
SHIFT + numeric Register an end point for auto
buttons (9) repeat
SHIFT + REW • Skip to the beginning of a
buttons file
• Move back one frame on a
VCR
SHIFT + FFWD • Skip to the end of a file
buttons • Move forward one frame on
a VCR
SHIFT + STOP • Close a file
buttons • Pause playback on a VCR
SHIFT + ENTER • Delete preset data
buttons simultaneously
• Process all files including
files that will be
overwritten
SHIFT + ESC buttons Process all files excluding
files that will be overwritten
SHIFT + REC + Start program output
PLAY buttons recording
SHIFT + REC + Stop program output
STOP buttons recording
h Positioner
This control is used to pan or tilt the camera. You
can also control the speed of the camera by
adjusting how hard you press this button (page
159).
This control can also be used to change the display
positions for picture-in-picture and logos
(pages 88, 99), and to move the Auto Chroma Key
cursor (page 106).
i Shuttle dial (outer ring)
This dial controls the camera zoom.
During file or VCR playback, turning this dial
clockwise plays the file in the forward direction at
a speed that corresponds to the amount the dial
was turned and turning this dial counterclockwise
plays the file in the reverse direction at a speed that
corresponds to the amount the dial was turned
(pages 159, 183).
j Jog dial (inner dial)
This dial controls the camera focus and iris (page
159) and performs playback operations for VCRs
or files stored on the external hard disk (page 183).
Names and Functions of Parts 21