Table of Contents
Advertisement
Naming cue-up points
200
Controlling VCR Playback From the Unit
3
In the VCR guide menu, 1 select the number to register the cue-up point to,
and confirm; 2 select [Preset], and confirm.
Example: When registering to numeric button [2].
1
1
Preset
2
Delete
3
Data Name
4
5
6
The cue-up point is registered to the corresponding numeric button on the
front panel.
Note
You can also register the point by pressing numeric button [2] while holding
down the SHIFT button.
The cue-up point is registered and the timecode of the position to be cued up
is displayed.
1
2 00:00:40:00
3
4
Note
To change the position to be cued up, repeat steps 2 and 3 above.
1
Press the NEXT selection button to which the VCR to be controlled is
assigned.
2
In the VCR guide menu, 1 select the cue-up point, and confirm; 2 select
[Data Name], and confirm; 3 enter the name of the cue-up point in the input
box, and confirm.
1
1
Preset
2 00:00:40:00
Delete
3
Data Name
4
5
6
The display for the number selected in step 2 changes from the timecode to
the cue-up point name.
1
2 aaaaaaaa
3
4
2
Shift z+2
[
]
2
3
Shift z+4
[
aaaaaaaa
]
Enter up to 20 characters.
* The VCR guide menu can only
display a limited number of
characters.
Advertisement
Table of Contents
