Table of Contents
Advertisement
Green: When a video subject to camera control,
external hard disk control, or VCR playback
control, or INT is specified with the NEXT
selection buttons (while the KEY button is lit).
Off: When other than a video subject to camera
control and external hard disk control or INT
is specified with the NEXT selection buttons.
c Audio level meter
When monitoring the any of the PGM/AUX1/
AUX2/MIX audio outputs or Pre Fader Listen
(PFL) result, this shows the audio level. An
indication below the meter shows which of PGM/
AUX1/AUX2/MIX or PFL is being monitored.
When the level exceeds the meter range, the
uppermost indicator lights red (page 210).
1 PGM viewer
This shows a program output.
1EDL status
Normal
a EDL status
During EDL creation, this shows the status of the
creation operation.
Creation operation indications
: ON LINE reservation status
: ON LINE execution status
(EDL creation in progress)
b Hard disk status
During program output recording, this shows the
hard disk status, remaining capacity, and
recording operation.
d KEY status display
The indicator lights red during keying to program
output video. The number (1 to 6) or "INT" of the
source selected for keying appears.
In addition, when [Chroma Key] (page 103) or
[Luminance Key] (page 99) is selected for [Key
Type] in the Video Effect menu, "Chroma" or
"Lum" appears respectively.
2Hard disk status
3Program
video
When configuring streaming settings
Hard disk
drive number
Recording operation indications
REC PAUSE: Recording on standby
REC: Recording
: ON LINE recording reservation (press
the ON LINE button to enter a recording start
state)
Unformatted: Formatting required
4VCR status
Remaining capacity is
indicated by a progress bar
Recording
Remaining time
operation
Names and Functions of Parts
29
Advertisement
Table of Contents
