Table of Contents
Advertisement
a What the preview is showing
Amber: When showing the video selected by the
NEXT selection button.
Green: When showing the video selected by the
NEXT selection button when the KEY button
is lit (video with a key inserted).
b Preview video
Under normal conditions, this displays the video
selected with the NEXT selection buttons. The
size of the video differs, depending on the PGM
output aspect ratio setting (page 52).
• When using 4:3 mode
The video is displayed at 320 × 240 pixels at
about 15 fps (about 12 to 13 fps for PAL).
• When using 16:9 SD or 16:9 HD mode
The video is displayed at 426 × 240 pixels at
about 15 fps (about 12 to 13 fps for PAL).
c Status
The status shown here differs as follows
depending on the video to be previewed.
When showing video from a remotely
controlled VISCA compliant camera
The status of the VISCA compliant camera is
shown.
No Response: Communication cannot be
established with the camera.
Initializing: Appears at system startup and during
camera reset.
When showing an INT graphics file
Loading: While file is loading
When playing a file on an external hard
disk
The status of file operations is shown.
Play position
File operation
File operation indications
Opening: Opening a file
PLAY: Playback
STOP: Stopped
STILL: Playback speed is set to zero with the
shuttle dial, or playback is stopped with the
jog dial
JOG: Using the jog dial
x2: Fast forward (x2, x4, x8, x16, x32, x64)
x2: Fast reverse (x2, x4, x8, x16, x32, x64)
Note
The x1/8, x1/2, and x1 indications are also
displayed while you are using the shuttle dial for
playback operations.
Play position
This shows the file play position.
When the play position is at the beginning or end,
z of each end lights.
While auto repeat playback is set, an icon is
displayed on the right side, and the positions of the
start and end points are indicated if they have been
set (page 184).
Start point
When performing playback on a VCR
VCR playback operation
VCR playback indications
PLAY: Playback
STOP: Stopped
STILL: Playback speed has been set to zero
with the shuttle dial, or playback has been
stopped with the jog dial
JOG: The jog dial operation in progress
Timecode
: Fast forward
: Fast reverse
No Cassette: There is no videocassette, disc, or
other medium inserted
No Response: Interface has not been established
REC: Recording
REC PAUSE: Recording on standby
Play position
End point
Icon
Timecode
Names and Functions of Parts
31
Advertisement
Table of Contents
