Master Cylinder - Honda Prelude 1993 Service Manual

Master Cvlinder and Brake
Booster
Master Cylinder
Removal/lnstallation
(cont'dl
Boorter Replacement
1. Pull th8 brak6 booster torward. then turn it to th6
right until the oporating rod is clear of the bulkhead
as shown below.
2.
Move the ope.sting rod beyond the left dampe.
bas6 by turning the brake booster.
EFAKE BOOSTER
OPERATII{G ROD
Continue to turn the brak8 booster until the
ope.ating rod points forward,
R€move the brake booster from the engin€ com-
partmont with the front cylinder shell sid8 of the
b18k€ booster uDw8rd.
Inspection
CAUTION:
a Do not splll brak6 tluid on the car; it may damagc the
palnt; il brak€ fluid doos contact th€ paint, wash lt
ofl immediately with vvater.
a B€foro roassambling, check thst all parts ar€ treo ot
dust and other fo?olgn particles,
a Do not try to disasssmblo th6 maEtar cylindef
assembly, Beplaco tho ma3t€r cylindor assombly
with a now part it necessary.
a Make sura no dirt or othof toloign matter is allowed
to contaminate tho blako tluld.
CYLINDER
SILICONE GREASE
Check for loaks or damags.
Frcnt
/
OPERATII{G ROD
LEFT DAMPER BASE
FRONT CYLII{DER SHELL
OPERATING ROD
19-14