Stereo Sound System
Unit Removal
CAUTION;
a All SRS oloctrical wiring hah€sses al€ cov€rad with
yallow outor inEulation,
a Befors disconnecting th€ SRS wilo harness, install
the short connsctor(s) on th€ airbag(s) {s6o pag€
23-294t.
a Replaco tha entiro affected SRS harness sssembly if
it has an op6n circuit or damagsd wiring.
NOTE: The radio may have a coded theft protection cir-
cuit, Be sure to get the customer's code numb€r before.
- Disconnecting the battery,
Removing the No. 43 (1O Al fuse.
(ln the under-hood fuse/relay boxl
- Removing the radio.
After service. reconnect power to the radio and turn it
on. When the word "CODE" is displayed. enter the
customer's 5-digit code to restore radio operation.
Remove the 1O mounting screws, then remove the
tront console.
23-210
2.
Remove the four mounting screws and pull the
radio panel assembly out part of the way.
Disconnect the connectors and antenna lead, then
remove the assembly.
Remove the two mounting screws. then temove
the ster€o radio/cassette player from the panel
assamblv.
4 .
RADIO PANEL ASSEMBLY