Rack Guide Adjustment - Honda Prelude 1993 Service Manual

On-Car Checks
Rack Guide Adjustment
CAUTIONT when servicing, be careful not to damage
the power steering fluid linss with the special tool.
NOTE: Adjust the rack guide at the center ol the rack
stroke.
2WS:
'1.
Remove the gearbox shield.
2.
Loosen the rack guide screw locknut with the
special tool.
3. Tighten, loosen and retighten the rack guide screw
two times to 4 N.m (O.4 kg-m, 2.9 lb-ft) then back
it oft 20
*
3".
4 . T i g h t e n t h e l o c k n u t t o a b o u t 2 5 N . m ( 2 . 5 k g - m ,
18 lb-ft) while holding the guide screw.
5. Check for tight or loose steering through the com-
plete turning travel.
6 .
R e c h e c k s t e e r i n g a s s i s t ( s e e p a g e 1 7 7 9 ) .
RACK GUIOE SCREW
1 7 - 7 5