Tapered Roller Bearing Replacement; Oil Seal Removal - Honda Prelude 1993 Service Manual

Replacement
NOTE:
. T h e t a p e r e d r o l l e r b e a r i n g a n d b e a r i n g o u t e r r a c e
should be replaced as a set.
. Inspect and adjust the tapered roller bearing preload
wheneverthe tapered roller bearing is replaced.
. Check the tapered roller bearings for wear and rough
rotation. lf tapered roller bearings are OK, removal is
not necessary.
1. Remove the tapered roller bearings using a bearing
p u l l e r .
BEARING PULLER
Install new tapered roller bearings using the special
tool as shown.
N O T E ; D r i v e t h e t a p e r e d r o l l e r b e a r i n g s o n u n t i l
they bottom against the differential carrier.
ATTACHMENT,
40 x 50 mm l.D.
07LAD - PWSo€ol
Tapered Roller Bearing Oil Seal Removal
Remove the differential assembly.
Remove the oil seal from the transmission housing.
OIL SEAL
Replace.
3. Remove the oil sealfrom the clutch housinq.
otl sEAt_
R e p l a c e .
1 .
2 .
CLUTCH HOUSING
1 5 - 5