Clutch Master Cylinder - Honda Prelude 1993 Service Manual

Clutch Master Cylinder
Removal/lnstallation
CAUTION: Avoid spilling brake fluid on paint.d sur-
tacos, as it may damago ths tinish.
NOTE: Plug the end of the res€rvoir hose, and cap the
end of the clutch pipe, with a plug and cap such as those
discarded from an A/C kit.
1. Remove the reservoir hose from the clutch master
c v l i n d e r a n d d r a i n t h e b r a k e f l u i d i n t o a s u i t a b l e
contarner,
NOTE: The brake fluid csn be sucked out through
the top ot the reservoir with a syringe.
5. Remove the clutch mast€r cvlinder.
2.
Remove the reservoir from the engine compartment
bulkhead.
3.
Disconnect the clutch pipe from the clutch mastsr
cylinder.
CLUTCH PIPE
19 N.m 11.9 kg-m, la lb-ttl
6 x 1 . 0 m m
CLUTCH MASIER
CYLINDER 10ll.rn 11.0 ke-m,
7 tb-ft)
6. Install the clutch mastor cylinder in the rev€rse
order of removal.
NOTE: Blsed the clutch hydraulic systom (see psge
12-6t.
CLUTCH
MASTER
CYLINDER
RESERVOIR
RESEBVOIR HOSE
Pry out the cotter pin, and pull the pedal pin out of
the voke. Remove the nuts.
COTTER PIN
Replac€.
PEDAL PIN
-6rl
NUTS
13 N{n (1.3 kg.m,9lb-ft|
2-5