Honda Prelude 1993 Service Manual page 1148

o .
5 . Disconnect the 16-P connector from the integrated
control unit.
Remove the mounting bolts and pull the fuse/relay
box away from the kick panel.
UNOER-DASH
FUSE/RELAY BOX
Disconnect the fuse/.elay box connectors and take
out the tuse/relay box.
UNDER-DASH FUSE/RELAY BOX
SRS MAIN
HARNESS
NOTE: The SRS main harness connecto. is double-
locked. To remove it, first lift the connector lid, then
press the connector tab down and pull the connec-
tor out.
Installatioo:
1. Reconnect the connectors to the fuse/relay box.
NOTE: To reinstall the SRS main harness connector,
push it into position until it clicks, then close the con-
nector lid.
2. Install the under-dash fuse/relay box.
3.
Reinstall the kick panel and door sill molding.
4. Reinstall the knee bolster and dashboard lower
cover.
6 .
Connect both the negative cable and positive cable
to the battery.
Confirm that all systems work properly.
23-69