Honda Prelude 1993 Service Manual page 1348

Wiper/Washer
Windshield Wiper Motor Replacement
Open the hood and remove the caD nuts and the
wiper arms. Be careful not to damage the hood.
Remove the windshield lower molding, hood seal,
and air scoop by prying the trim clips out and
removing the sctews.
3, Disconnect the 5-P connector from the wiDer mo-
tor, then remove the wiper harness from the wiDer
linkage.
Remove the wiper linkage assembly by removing
the three mounting bolts.
CAP NUT
WIPER LII{KAGE ASSEMBLY
23-270
Remove the three mounting bolts and one nut from
the wiper linkage, then remove the wiper motor.
NUT
22 N.m {2.2 kg-m, 16 lb-ftl
MOUI{TIIIIG
BOLTS
10 .m {1.O kg-m, 8 lb-ft|
VNPER MOTOR