Steering Pump Illustrated Index - Honda Prelude 1993 Service Manual

Steering Pump
20 N.m
(2.0 kg-m, 14
lllustlated Index
CAUTION: Pump components aro made ot aluminum, Be careful not to damago lhem when servicing'
NOTE:
a Clean all of the disassembled parts thoroughly.
a Replace all O-rings and seals. Do not dip new O-rings and seals in solvent; coat O-rings with power steering fluid
before installation, and make sure they stay in place during reassembly.
a lf any part denoted with an asterisk (*) is worn or damaged, replace the complete pump.
NEEDLE ROLLER EEARING
FLANGE BOLT
iPUMP CAM RIf{G
Check lor damage
and wear,
PUMP COVER
'PUMP VANES
(10 platBl
Check for damage
Check for damage to
sealing face.
ROLLER
4.5 x 49.8 rnm
FLANGE AOLT
8 8 . 5 x 1 . 9 m m
O.RING
R€place.
.PUMP HOUSING
Chock {or damage to
s€aling faces.
1 6 . 8 x 1 . 9 m m
O.RING
Replace.
-6.l
OIL SEA
Replace.
1 3 x 1 . 9
o-Rtt{G
Rgplace.
IT{LET JOINT
FLOW CONTROL VALVE
Check lor pressure
leak.
ORIVE
SHAFT
Check for
and wear.
--(cL
*{@
BEARING
Check lor
excessive
ptay.
PULLEY
Check for distortion
PUMP SEAL
SPACER
damage
FLANGE BOLT
11 N.m (1.1 kg-m, 8 lb-ft}
and cracks.
f^@'
B1.2'""'-"
PULLEY NUT
65
.m
16.5 ks-m, 47 lb-ft)
22.1 x 1.9 mm O-Rl 6 -'>Q
11 N.m (1.1 kg-m, 8 lb-lt)
17-102
CONTROL VALVE CAP