Fuel Tank - Honda Prelude 1993 Service Manual

Hide thumbs Also See for Prelude 1993:

Table of Contents

FuelSupply System

Do not smoke while working on fuel syst€m. Keep open llame away from your work area.

1. Block front wheels. Jack up the rear of the car and support with jackstands.

2. Remove the drain bolt and drain the fuel into an aooroved container,

3. Remove the access panel.

4. Disconnect the connectors from the fuel gauge sending unit and the fuel pump, then remove the fuel feed line and

return hose.

CAUTION: Be sur€ to turn the ignition switch OFF before disconnecting the wires.

5. Remove the fuel hose protectors.

6. Oisconnect the hoses.

CAUTION: Whon disconnocting the hos6s. slide back ths clamps, then twist hosos as you pull to avoid damaglng

7. Place a iack, or other support, under the tank.

8. Remove the strap bolts and nuts. and let the straps fall free.

9. Remove the fuel tank,

NOTE: The tank may stick on the undercoat applied to its mount. To remove, caretully pry it off the mount.

1O. lnstall a new washer on the drain bolt and the fuel pump line, th€n install pans in the reverse order ol removal.

38 N m 13.8 ks-m. 28 lb-ft|

CAUTION: Cloan the flared ioint of high prossu.o ho8e3

thloughly botoro .oconnecting thom.

SENOING UNIT

50 N.m (5.o kg-m, 36 lb-tt)

3a N.m (3.8 ks-m. 28 lb-ft|

Troubleshooting