Pedal Height Adjustment - Honda Prelude 1993 Service Manual

Pedal Height
Adjustment
2 .
'I
. Disconnect the brake switch connector, loosen the
brake switch locknut and back off the brake switch
until it is no longer touching the brake pedal.
Measure the pedal height from the left side center
of the Dedal surface.
A: Podal Freo Play
1 - 5 m m ( 1 / 1 6 - 1 3 / 6 4 i n )
B: Standard P€dal Height (with floor mat
removed)
MT: 165 mm (6.5 inl minimum
AT: 186 mm (7.3 in) minimum
Loosen the pushrod locknut and screw the pushrod
in or out with pliers until the standard pedal height
from the floor is reached. After adjustment. tighten
the locknut firmlv,
3 .
PUSHROD LOCKNUT
l5 N.m 11.5 kg-m, 11lb-fll tor cai. without ABS
19 .m {1.9 kg-m, 14 lb-ftl for cars with ABS
BRAKE
swtrcH
4.
Screw in the brake switch until its plunger is fully
depressed (threaded end touching the pad on the
pedal arm). Then back otf the switch 1/4 turn to
make O.3 mm {0.O1 in} of clearance between the
threaded end and pad. Tighten the locknut tirmly.
Connect the brake switch connector.
CAUTION: Ch6ck that the brak€ lights go oft
whon ths psdsl is l€leased.
BrEke Podal Froe Play Inspection:
Stop the engine and inspect the play by pushing the
pedal by hand.
Brake P€dal Free Play: 1-5 mm {1/16-13/64 inl
CAUTION: It tho pedal freo play is insufficient, it
may ro3ult in brak€ drag.
PAD
1 9 - 4
bsnmrr