Honda Prelude 1993 Service Manual page 1354

Cruise Control
Control Unit Input Test
CAUTION:
a All SRS aloctfical widng harnessos are cov6r€d with
yollow outo. insulation.
a Brtoro di3connoctlng the SRS wira hamoss, install
tho short conn6ctor(s) on the airbag(s) (see page
23-2941.
a Replace the entiro affoctod SnS harn6ss a$ombly it
it has an opon clrcuit or damagod wiring,
1. Disconnect the 14-P connector from the control
untr.
Inspect the connector and socket terminals to be
sure they ars all making good contact.
a lf the terminsls are bent, loose, or corrodsd.
fepair them as necessary, and rechsck the
system,
a It the terminals look OK, make the following in-
put t€sts at the connector,
- lf a test indicates a p.oblem, find and correct
th€ caus€, then recheck the svstem.
- lf allthe inputtests prove OK, the controlunit
must be faulty; replace it.
cRUrsE coNrRoL u wr /
r4-P CON|{ECTOR
23-276
View from wire side