Honda Prelude 1993 Service Manual page 1292

Hide thumbs Also See for Prelude 1993:
Table of Contents

Advertisement

Stereo Sound System
Antenna Mast Replacement
NOT€: The antenna mast alone can be replaced
without having to remove the power antenna motor.
1. Remove the special nut, spacer, and bushing.
2. Carefully withdraw the antenna mast while exten-
ding it by turning the radio switch ON.
g.-
(3
\,.-
ANTENNA MAST DRIVE CAELE
,-/ ANTENNA wRENcH
/
oTJAA-OO10{)08
SPECIAL tIUT
SPACER
BUSHII{G
SPECIAL NUT
2.3 N.m 10.23 ks-m, 1.7 lb-ftl
POWEN ANTENNA
MOTOR
TEETH
23-214
Hold the new antenna so the teeth on the drive
cable face in the direction shown, and insen the
drive cable into the antenna housino.
Check for engagsment of the cable teeth to the
drive gear by carefully moving the cable up and
down,
Turn the radio switch "OFF", and let the motor pull
the drive cable inside the ant€nna housing.
Clean the threads on the antenna mast housing.
Insert the antenna mast into the antenna housing,
install the bushing and spacer, and tighten the
sp€cial nut to 2.3 N.m (O.23 kg-m. 1.7 lb-ft).
NOTE: It th€ specialnut is overtorqued, the anten-
n8 may stick, lf sticking occurs, back the nut off
until thg antonna moves lrselv.
Check thst th6 sntenna mast retracts and extends
fully wh€n th€ radio switch is turned ON and OFF
repeatedly.
4 .
o -
8 .

Advertisement

Table of Contents
loading

Table of Contents