Honda Prelude 1993 Service Manual page 835

Rear Suspension
Knuckle/Hub (cont'dl
35. Install the hub unit and spindle washer on the
knuckle.
SPi DLE WASHER
lnstall the brake disc with the 6 mm brake disc re-
taining screws.
ito.
6 mm BRAKE DISC
RETAII{ING SCNEWS
10 N.m (l.o kg-m, 7 lb-ft|
18-32
37. Install the caliper assembly with the caliper bracket
mounting bolts.
38. Installthe bfake hose with the brako hose mounting
bolts,
BRAI(E HOSE MOUI{TING BOLT
22 N.m 12.2
16 tb-ft|
ASSEMBLY
CALIPER
MOUNTII{G BOLTS
39 N'm 13.9 kg-m, 2a lb-ft)
39. Install the new spindle nut, then tighten the nut'
40. Install the new hub cap.
41. Install the rear wheel with the wheel lug nuts.
NOTE: BeJore instslling the wheel, clean the mating
surface of the brake disc and inside o{ the wheel.
REAN WHEEL
SPI DLE ]{UT
2 2 x 1 . 5 m m
185 N,m (18.5 kg-m. 134 lb-ft|
NOTE: After tightening, uss a drift to
stake the spindle nut shouldgr against
the spindl6.
42. Checkthe rear wheelalignment and adjust if neces-
sary (see page 18-4).
WHEEL LUG NUT
1 1 0 N . m
(l I kg-rn, 80 lb-ft}