Honda Prelude 1993 Service Manual page 1314

Hide thumbs Also See for Prelude 1993:

Table of Contents

Seat Heaters (Canada)

1. Disconnect the 6-P and 4-P connectors as shown

NOTE: Left front seat is shown. Right front seat is

Soat cushion hoata.:

Check for continuity between the No, 2 and No. 3

terminals (R x 103 scale).

Thsre should be continuity.

Seat back hoatel:

Check for continuity between the D and No. 8 ter-

minals (R x 103 scale).

There should be continuitv.

Seat Heater Relay Test

Remove the soat, then rsmove the relav from the

bottom of ths seat.

Check continuity between relav terminsls.

a Ther8 should be continuity between the F and A

terminals, and the C and D terminals when

power and ground are connected to th€ F 8nd E

a Th6rs should be continuity between the F and D

t6rminals when power is disconnected.

NOTE: Left and

right ssat heater relavs are the

t - F - - - - - - - - - t o

Troubleshooting