Differences Between Models; C226 And C - Ricoh C226 Service Manual

1. DIFFERENCES BETWEEN MODELS

1.1 C226 AND C224

No. Item
ADF, Scanner, and
1.
Operation Panel
2. Paper Delivery Table
C226
DIFFERENCES BETWEEN MODELS
These units are commonly used in our facsimile products.
The C226 model uses a book type scanner. The C224
model does not have this feature. The contact image
sensor removes the necessity of complicated adjustments
needed for a CCD scanner.
A half-tone processor is used for image processing. This
processor is similar to those in higher level models. It
produces better copy quality half-tone images in Photo
and Letter/Photo modes.
[A]
[B]
The C226 model uses a new paper delivery table. This
table has newly added small guide plates [A] on each
front and rear side fence. The guide plates stack the
prints more evenly. The small guide plates [B], on the
bottom of each side fence keep the prints aligned in the
center of the table while the copies are stacked.
Also, the paper stack capacity has been increased from
500 sheets to 1000 sheets.
[C]
Due to the the new paper delivery table design, a new
auxiliary bracket [C] has been added for optional TAPE
MAKER installation. For details, refer to the "Tape Maker
Installation" section.
8-2
Remarks
SM