10.3 SECOND PAPER EXIT SENSOR ADJUSTMENT
Purpose: To ensure that the sensor detects correct paper delivery and that the
jam indicator blinks and the machine stops when a paper wrap or
exit misfeed occurs
1. Access the service program mode number 136.
2. In the ready state, the displayed output voltage of the 2nd paper exit
sensor is 0.10 volts.
3. Activates the 2nd paper exit sensor by placing a sheet of 65g/m paper
above the sensor. The displayed output voltage is 3.59 volts ± 0.1 volts.
4. If the activated voltage is incorrect, adjust the 2nd paper exit sensor and
gravitity variable resistor, VR102 on the main board.
5. When the 2nd paper exit sensor is activated, the LED 102 on the main
board will light.
C226
5-64
PAPER DELIVERY
[B]
SM