Lower Guide Plate Adjustment - Ricoh C226 Service Manual

7.4 LOWER GUIDE PLATE ADJUSTMENT

Purpose: To ensure a smooth paper feed excluding paper jams, folds, or
wrinkles.
1. Ensure that the distance between the lower guide plate [A] and the lower
second feed roller [B] is 0 to 0.1 mm as shown.
2. If incorrect, remove both front and rear covers and loosen the screws [C]
on both sides. Then, adjust the distance by lowering and raising the lower
guide plate.
3. After adjustment, retighten the screws [C].
C226
[C]
5-30
PAPER FEED SECTION
[A]
0 – 0.1 mm
[A]
[B]
[B]
SM