First Paper Exit Sensor Adjustment - Ricoh C226 Service Manual

PAPER DELIVERY

10.2 FIRST PAPER EXIT SENSOR ADJUSTMENT

Purpose: To ensure that the sensor detects correct paper delivery and that the
jam indicator blinks after an exit misfeed or a paper wrap occurs.
1. Access the service program mode number 135.
2. In the ready state, the displayed output voltage of the 1st paper exit
sensor is 0.10 volts.
3. Activates the 1st paper exit sensor by placing a sheet of 65g/ paper
above the sensor. The displayed output voltage is 3.59 volts ± 0.1 volts.
4. If the activated voltage is incorrect, adjust the 1st paper exit sensor and
gravitity variable resistor, VR103 on the main board.
5. When the 1st paper exit sensor is activated, the LED 103 on the main
board will light.
SM 5-63
[A]
C226