Ricoh C226 Service Manual page 33

GUIDE TO COMPONENTS AND THEIR FUNCTION
1. Document feeder
(Option)
2. Master eject unit
open button
3. Master cut button
4. Pressure release
lever
5. Drum rotation
button
6. Drum unit lock
lever
7. Drum unit
8. Ink holder
9. Main switch
10. Paper delivery table
11. Small size paper
delivery end plate
12. Paper delivery end
plate
13. Paper delivery side
plate
14. Wing guides
15. Master eject
container cover
C226
Original inserted into the document feeder are individually
and automatically fed onto and removed from the exposure
glass.
Press to remove misfed paper or a misfed master.
Press to cut the master leading edge after installing a new
master roll.
Use to install the master roll.
Press to rotate the drum unit.
Lift to unlock and pull out the drum unit.
The master is wrapped around the drum.
Set the ink cartridge in this holder.
Use to turn the power on or off.
Completed prints are delivered here.
Use to align the leading edge of prints on the delivery table
that are A4, 8 " x 11" or smaller.
1/2
Use to align the leading edge of prints larger on the delivery
table than A4, 8 " x 11".
1/2
Use to align the prints on the paper delivery table.
When printing on thin or small size paper, lift these guides.
Open to remove the master eject box.
1-8 SM