Ricoh C226 Service Manual page 296

Component
1st Original Sensor
ON condition
(C212/C213 Only)
(Not interrupted)
OFF condition
(Interrupted)
2nd Original Sensor
ON condition
(Not interrupted)
OFF condition
(Interrupted)
Original
ON condition
Registration Sensor
(Not interrupted)
OFF condition
(Interrupted)
Master Eject Switch
ON condition
(Sensor)
(Not interrupted)
OFF condition
(Interrupted)
Pressure Plate
ON condition
Position Switch
(Feeler is actuated)
OFF condition
(Feeler is not
Full Master
ON condition
Detecting Switch
(Feeler is actuated)
OFF condition
(Feeler is not
Paper Table Lower ON condition
Limit Sensor (Interrupted)
OFF condition
(Not interrupted)
SM
Condition
First original can be printed correctly, but the jam
indicators "A" and
process when the ADF drive motor turns on.
When the Master Making key is pressed, the jam
indicators "A" and
When the main switch is turned on, the jam
indicators "A" and
impossible.
The original is not inserted automatically, and the
jam indicators "A" and
Making key is pressed (C211 model).
The original is fed when the Master Making key is
pressed, but the leading edge of the original is
damaged because the original transport motor
fails to turn on. The "A" and
blink (C212/C213 model).
After the master making process is finished, the
Jam indicators "A" and
The original is fed until the leading edge of the
original goes 5 cm past the exposure glass, then
jam indicators "A" and
After the master is ejected and one sheet of paper
(trial print) is delivered, the jam indicators
A
"F" and
When the master is being ejected, the jam
indicators "F" and
The pressure plate does not go up. After one
sheet of paper (trial print) is delivered, the
indicators "F" and
When the main switch is turned on, the pressure
plate keeps moving up and down.
actuated)
When the master eject box is full, the indicators
>
"F" and
After master ejecting is finished, the indicators "F"
>
and blink.
actuated)
The paper table does not go down.
When the paper feed table goes down and stops,
the cover open indicator blinks.
6-11
TROUBLESHOOTING
Phenomenon
A
blink during the next master
A
blink.
A
blink and reset is
A
blink when the Master
A
jam indicators
A
blink.
A
blink.
blink and reset is impossible.
A
blink.
>
blink.
do not blink.
03/98
C226