Thermal Head Removal - Ricoh C226 Service Manual

MASTER FEED SECTION

5.6 THERMAL HEAD REMOVAL

[A]
1. Open the scanner unit.
2. Remove the platen roller and remove the master roll.
3. Remove the thermal head cover [B] (2 screws).
4. Disconnect the two thermal head connectors [C].
5. Remove the thermal head [D] (2 screws).
NOTE: 1. When replacing the thermal head, ensure the thermal head
guide plate [E] is positioned above the lower cutter unit guide
plate [F].
2. Ensure that neither of the connectors are loose before
reassembling the machine.
C226
[D]
[C]
5-22
[E]
[F]
[B]
SM