Error Conditions - Ricoh C226 Service Manual

ORIGINAL FEED SECTION

1.1.7 Error Conditions

1. Book Scanner
The main CPU will detect an error (Error Code E-13 is displayed) if any of the
following conditions occurs.
Condition
Incorrect home position
sensor condition
2. ADF
"Paper feed jam" is displayed if one of the following conditions occurs.
Jam Condition
Non-feed
Misfeed 1
Misfeed 2
C226
Description
The scanner home position sensor was not
actuated after the scanner motor was energized for
more than 7 seconds back to the home position
after scanning.
The scanner could not leave the home position
within 4 seconds of power on or when the scanner
could not return to the home position within 2
seconds of leaving.
The scan line sensor did not switch on within
5 seconds of the ADF motor starting.
The scan line sensor did not turn off after turning on even
when the trial print is made (when the printing pressure
sensor is actuated).
When the final page of the document has been fed out of the
scanner, or when a jammed document has been removed,
the ADF motor will reverse. The message is displayed if the
document sensor remains on at this time.
2-8
Description
Error Code
E-13
SM