Ricoh C226 Service Manual page 157

SERVICE PROGRAM TABLE (I/O CHECK MODE)
No. Display
85 Initial Com-
pression
**88 Auto Class
Mode
90 Thermal Head
Test
92 Thermal
Paper Mode
95 Scanner Free
Run
96 ADF Original
Feed
98 Economy
Count
103 Margin Erase
Count
104 On line Count
105 Overlay Count Displays the total number
106 Enlarge Count Displays the total number
107 Reduction
Count
111 Total Count
*113 Resettable
Count
SM
Function
Specifies whether full
master box detection is
made at power-up.
Specifies whether the
Auto Class mode is used.
Select "1" to carry out the
thermal head test.
Use this mode to test the
thermal head.
Selects the type of
scanner free run.
Carries out the ADF
original feed check. (The
speed can be changed;
see Remarks (6).)
Displays the total number
of masters made in
Economy mode.
Displays the total number
of masters made with the
Margin Erase key.
Displays the total number
of masters made in On
Line mode.
of masters made in
Overlay mode.
of masters made in Fixed
Enlargement mode.
Displays the total number
of masters made in Fixed
Reduction mode.
Displays the total number
of masters and prints.
Used by the customer to
display the total number
of masters and prints.
Factory
Settings
Setting
0: No
1: Yes
0: No
1: Yes
0: Off
1: On
0: No
1: Yes
0: With the
lamp off
1: With the
lamp on
Start with
the Print
Start key.
Stop with
the Stop
key.
4-14
Comments
0
See Remarks (3).
0
See the Thermal
0 Head Test
section.
See Remarks (4).
0
• Start with the
Start key.
Stop with the
0
Stop key.
• See Remarks
(5).
See Remarks (6).
0
0
0
0
0
0
M: Master count
0
P: Print count
M: Master count
0 P: Print count
C226