Ricoh C226 Service Manual page 275

No. Item
New Functions in
4.
Operation
C226
DIFFERENCES BETWEEN MODELS
The following functions were not used in the C224 model:
– CS Mode
– SP Mode (User Accessible)
– Paste Shadow Erase Mode (Unique to the C226
– One Touch Class Mode (Unique to the C226 model)
– Tint Mode (Unique to the C226 model)
– Program Mode
– Letter/Photo Mode (In addition to the Letter and
– Quality Start Mode: See NOTE 1
– Edge Erase Mode: See NOTE 2
– Edge Erase / Center Erase Mode: See NOTE 2
NOTE:
1) In the Quality Start mode, after the master making
process, one extra print (this can be set by the
operator from 0 to 3 prints) is made at the lowest
printing speed (20 cpm). The trial print is made in the
same way as other models. As the default setting, two
extra prints are made in the Quality Start mode. The
Quality Start mode is also used in some other models,
however, this method is unique to the C226 model.
2) In other models which use a book type scanner,
shadows near the edges and the center of prints (with
the platen cover open) can be removed. In the C226, a
similar function is available as the Edge Erase/Center
Erase mode. Before using this function, the print paper
size must be selected manually by the operator. Also.
the erasable margin widths for the edges and center
adjustable with a user accessible SP mode.
The Edge Erase mode is the same as the Margin
Erase mode used in some other models that have a
book type scanner.
8-4
Remarks
model)
Photo modes.)
SM