Manual Cut - Ricoh C226 Service Manual

BASIC OPERATION

2.3 MANUAL CUT

Start Signal
Timer
Drive Motor
Home Position
Sensor
Start Signal
Timer
Drive Motor
Home Position
Sensor
When the manual cut switch [A] is pressed, the timer will start counting and
the drive motor will start feeding the tape. 2,500 milliseconds later, the drive
motor will reverse to cut the tape.
If the manual switch is pressed longer than 2,500 milliseconds, the tape will
continue to be fed out until the manual switch is released. Afterward, the
motor will reverse to cut the tape.
C226
2,500 ms
Reverse
Forward
2,500 ms
Forward
7-4
[A]
Reverse
SM