Ricoh C226 Service Manual page 152

Service Program Mode Access Procedure (For Users)
This procedure allows users to access only the service program modes that
are marked with an asterisk in the service program table.
1. Press the SP Mode key on the operation panel.
2. The following is displayed on the LCD.
3. Using the number keys, enter the desired SP mode number (listed in the
service program table), then press the Enter (#) key.
4. To exit the SP mode, press the Clear Modes key.
Change Adjustment Values or Modes
1. After entering the desired SP mode number and pressing the Enter (#)
key, the current value or mode will be displayed on the LCD (at the end
of the second line).
2. Enter the desired value or mode using the number keys (listed in the
service program table).
Use the Program Class key to toggle between + and –.
3. Press the Enter (#) key to store the desired value or mode.
4. To exit the SP mode, press the Clear Modes key.
SM
SERVICE PROGRAM TABLE (I/O CHECK MODE)
SP–MODE
PROGRAM No. 0
4-9 C226