Ricoh C226 Service Manual page 138

[J]
[K]
10. Install the ADF Upper Rear Cover [J] (1 sunken screw and 1 hook).
11. Install the ADF Upper Front Cover [K] (1 sunken screw and 2 hooks).
12. Install the ADF Roller Assembly [L].
13. Install the Original Table [M], then install the Platen Cover Stopper [N] on
it.
NOTE: To enable the use of the ADF function, you must change the SP
mode setting. Access the SP mode and set SP No. 2 to "1". For
details, refer to "SERVICE PROGRAM TABLE."
SM
[L]
3-13
INSTALLATION PROCEDURE
[N]
[M]
C226