Ricoh C226 Service Manual page 298

Component
Right Cutter Switch
(Rear) (Feeler is actuated)
OFF condition
Left Cutter Switch
(Front) (Feeler is actuated)
OFF condition
First Drum Position OFF condition
Sensor (Not interrupted)
Second Drum
Position Sensor
OFF condition
(Not interrupted)
Master Buckle
Sensor
OFF condition
SM
Condition
ON condition Master is not cut. (Cutter unit does not move at
all.)
When the master is cut, indicator "E-01" lights. At
(Feeler is not that time the cutter does not return to the front.
actuated)
ON condition Master is not cut. (Cutter unit does not return
from the rear.)
When the main switch is turned on, indicator
(Feeler is not "E-01" lights.
actuated)
When the main switch is turned on, the drum
starts rotating and it cannot be stopped.
* Print (When the Print Start key is pressed)
1. After one sheet of paper is fed, the drum
continues to rotate and paper feed stops.
2. The machine does not stop when the Stop
key is pressed.
3. Paper feed and delivery jams are not
ON condition
detected.
(Interrupted)
* Master making (When the Master Making
key is pressed)
1. After the new master is wrapped around the
drum and one sheet of paper (trial print) is
delivered, the drum does not stop rotating.
The Stop key does not work.
* Print (When the Print Start key is pressed)
1. The paper feed solenoid does not work and
the Stop key does not work.
* Master making (When the Master Making
key is pressed)
1. When the Master Making key is pressed, the
drum starts rotating and cannot be stopped.
* Print (When the Print Start key is pressed.)
1. Paper feed solenoid does not work and drum
continues to rotate.
* Idling time (Reset key + 0 key)
ON condition
1. Drum does not stop rotating.
(Interrupted)
* Master eject
1. When the Master Making key is pressed,
master eject indicators "F" and
and the master is not ejected.
When the main switch is turned on, jam
ON condition
indicators "C" and
Original feeding and master feeding stops
halfway, and jam indicators "C" and
6-13
TROUBLESHOOTING
Phenomenon
A
blink
A
blink and cannot be reset.
A
blink.
03/98
C226