Ricoh C226 Service Manual page 257

TROUBLESHOOTING
Component
Paper Table
Safety Switch (Feeler is actuated)
(Feeler is not actuated)
Paper Table
Height Sensor
Paper End
Sensor
Pressure Sensor
First Paper Exit
Sensor
(Paper does not exist)
Second Paper
Exit Sensor
(Paper does not exist)
Paper Feed
Solenoid
Drum Rotation
Sensor
Master End
Sensor
C226
Condition
ON condition When the main switch is turned on, the cover
open indicator blinks.
OFF condition If paper table lower limit sensor is faulty, the
paper table moves all the way down and locks.
ON condition When the paper feed table goes up, it does not
(Interrupted) stop at the proper position and E-02 lights.
The paper feed table does not go up. When
OFF condition
(Not interrupted)
printing starts, jam indicators "B" and
When there is no paper on the paper feed table,
ON condition
the Print Start key can be activated, but jam
(Not interrupted)
indicators "B" and
Though there is paper on the paper table, paper
OFF condition
(Not interrupted)
end indicators "B" and
After one sheet of paper is printed, the machine
ON condition
stops. At that time, the counter does not count
(Interrupted)
down and jam indicators "B" and
When the main switch is turned on, jam
OFF condition
(Not interrupted)
indicators "B" and
When the main switch is turned on, the machine
ON condition
(Paper exists)
stops and jam indicators "G" and
After one sheet of paper is printed, the machine
OFF condition
stops and jam indicators "B", "E", and
When the main switch is turned on, jam
ON condition
(Paper exists)
indicators "G" and
After one sheet of paper is printed, the machine
OFF condition
stops and jam indicators "E" and
The paper is not fed and jam indicators "B" and
OFF condition
A
The drum begins to rotate when the main switch
ON condition is turned on. E06 lights when the Master Making
(Interrupted) key is pressed or when the Print Start key is
pressed.
The drum begins to rotate when the main switch
OFF condition is turned on. E06 lights when the Master Making
(Not interrupted) key is pressed or when the Print Start key is
pressed.
Normal operation when master is present.
Master end is not detected; Master End
ON condition
(Actuated) indicators "C" and
indicators "C" and
Even if the master is present, the Master End
OFF condition
(Not actuated)
indicators "C" and
Phenomenon
A
A
A
blink.
>
A
>
6-12
A
blink.
blink.
>
blink.
A
blink.
blink and cannot be reset.
A
blink.
A
blink.
blink.
A
blink.
do not blink and jam
blink.
blink.
03/98
SM