Master Eject Section; Overall - Ricoh C226 Service Manual

MASTER EJECT SECTION

3. MASTER EJECT SECTION

3.1 OVERALL

Lower
Eject
Roller
Master Eject Box
To eject the master wrapped around the drum, the drum will rotate in the
direction opposite to the printing direction. Thus, the master is ejected and is
fed into the master eject box by utilizing the back curl of the master trailing
edge which is caught between the upper and lower eject rollers.
The ejected master is then compressed by the pressure plate to fully utilize
the master box capacity.
C226
Master
•
Drum rotates in direction opposite to
printing.
•
Master eject rollers rotate.
•
Lower eject roller contacts drum.
•
The curled trailing end of the master
is caught between the upper and
lower eject rollers to eject the master
Drum
and feed it into the master eject box.
•
The ejected master is compressed
Pressure Plate
by the pressure plate.
Ejected Master
Master Eject Box
2-25 SM