Exit Pawl Clearance Adjustment - Ricoh C226 Service Manual

PAPER DELIVERY

10.4 EXIT PAWL CLEARANCE ADJUSTMENT

Purpose: To ensure that the printing paper is delivered without paper wrap or
damage to the screen.
1. Remove the rear cover of the machine.
2. Manually dis-engage the paper feed and the printing pressure solenoids.
Using a spanner (10 mm), gradually rotate the drum rotation shaft
counterclockwise to move the exit pawl [A] to the drum.
3. Ensure that the clearance between the drum and the exit pawl [D] is 0.5
to 0.7 mm when the exit pawl is at the position closest to the drum.
4. If incorrect, open the master eject box and loosen the hexagon nut [B] of
the exit pawl drive arm. Then adjust the clearance by turning the screw
[C].
5. Check adjustment by repeating steps 2 and 3.
SM
[C]
[B]
[D]
5-65
[A]
C226