Replacement And Adjustment; Cutter Replacement - Ricoh C226 Service Manual

3. REPLACEMENT AND ADJUSTMENT

3.1 CUTTER REPLACEMENT

[B]
[C]
1. Remove the tape dispenser from the main body. (1 connector, 2 nuts or
screws)
2. Remove the support bracket [A]. (3 screws)
3. Remove the tape dispenser cover [B] and the upper housing [C] (1 screw,
1 connector)
4. Remove the tape dispensing assembly [D]. (2 connectors)
5. Replace the cutter assembly [E]. (2 screws)
NOTE: Ensure that the cutter moves smoothly by rotating the cam drive
gear [F] clockwise manually after the replacement.
6. Reassemble the tape dispenser.
NOTE: Ensure that the tape dispenser PCB [G] and the tape dispensing
bracket [H] are in lower housing slots [I].
SM
REPLACEMENT AND ADJUSTMENT
[D]
[E]
[G]
[A]
[I]
7-5
[F]
[H]
C226