Ricoh C226 Service Manual page 158

No. Display
*114 CLR Reset- Clears the resettable
table Count total master/print
counters.
115 ADF Mode Displays the total number
Count of sheets fed in the ADF
mode.
116 Scanner Displays the total number
Mode Count of originals set in platen
mode.
117 Color Drum Displays the total number
Count of prints made using the
color drum.
119 CLR All Total Clears the following
Count counters:
SP Nos. 111, 115, 116
and 117.
*120 User Code Selects user code mode,
-1 Mode and displays the total
number of prints made in
the User Code mode.
-2 Auto Reset Selects the auto reset
Time time.
*121 UC Count Displays the total number
of masters and prints
made with each user
code.
*122 Clear UC Clears the selected user
Count code counter.
*123 Total UC Displays the total number
Count of masters and prints for
up to 20 user codes.
*124 Clear Total Clears the total user
UC Count code counter.
130 Input Check Displays the inputs from
Mode sensors and switches.
131 Output Check Turns on the electrical
Mode components.
132 All Indicators Turns on all the
ON indicators on the
operation panel.
135 SN: 1st Paper Displays the 1st paper
Exit exit sensor voltage.
SM
SERVICE PROGRAM TABLE (I/O CHECK MODE)
Function Settings
0: No
1: Yes
0: No
1: Yes
0: No
1: Yes
0: Unlimited
1: 1 min.
2: 2 min.
3: 3 min.
4: 4 min.
5: 5 min.
0: No
1: Yes
0: No
1: Yes
4-15
Factory
Comments
Setting
0
0
0
0
0
See the user
code mode
0
section.
Displays only
when "Yes" is
selected in
0
SP120-1.
Press the # key
to shift to
0
another user
code.
Same as above.
0
0
0
See the input
check table.
See the output
check table.
Press the # key
to light all the
indicators.
Unit: Volts
C226