Second Feed Roller Sector Stopper Clearance Adjustment - Ricoh C226 Service Manual

7.8 SECOND FEED ROLLER SECTOR STOPPER
CLEARANCE ADJUSTMENT
0.1 – 0.3 mm
Purpose: To ensure that the second feed roller start rotating when the paper
feed solenoid is turned on and stops rotating when the paper feed
solenoid is turned off.
1. Remove the rear cover of the machine.
2. Gradually turn the drum rotating shaft [A] counterclockwise with a
spanner (10 mm).
3. After turning the sector gear [B] fully counterclockwise, ensure that the
clearance between the sector pin [C] and the sector stopper [D] is 0.1 to
0.3 mm.
4. If the clearance is incorrect, loosen the Allen screws [E] and adjust the
clearance between the sector pin and the sector stopper.
C226
[C]
[D]
5-34
PAPER FEED SECTION
[B]
[E]
[A]
SM