Paper Feed Section; Paper Table Safety Switch Adjustment - Ricoh C226 Service Manual

PAPER FEED SECTION

7. PAPER FEED SECTION

7.1 PAPER TABLE SAFETY SWITCH ADJUSTMENT

Purpose: To ensure that the paper table safety switch turns on to prevent the
paper table from going up when the paper table is closed.
1. Ensure that the safety switch [A] turns off when the paper table is opened
and that the safety switch turns on when the paper table is closed. Also,
ensure that the distance between the actuator [B] and the safety switch
[A] is 0.3 mm to 0.5 mm when the switch turns on.
2. If incorrect, loosen the screw [C] and adjust the switch bracket position.
3. After adjustment, repeat step 1 again.
4. Also, ensure that the safety switch does not turn on when 1,000 sheets of
standard weight paper are placed on the paper table.
SM
[B]
[C]
[A]
5-27
0.3 ~ 0.5 mm
[B]
C226