Right And Left Cutter Switches Adjustment - Ricoh C226 Service Manual

5.3 RIGHT AND LEFT CUTTER SWITCHES ADJUSTMENT

[C]
Purpose: To ensure that the cutter slider stops properly.
Adjustment Standard: Confirm that the cutter holder activates the switches.
1. Remove the cutter unit. (See Cutter Unit Removal.)
2. After moving the cutter holder [A] fully to the left, ensure that the left
cutter switch [B] is turned on. Ensure that the right cutter switch [C] is also
turned on when the cutter is moved fully to the right.
3. If not, loosen the mounting screws [D] and adjust the switch position.
SM
[D]
[A]
5-19
MASTER FEED SECTION
[B]
C226