Separation Plate/Lower Separation Roller Replacement - Ricoh C226 Service Manual

7.14 SEPARATION PLATE/LOWER SEPARATION ROLLER
REPLACEMENT
[E]
Separation Plate:
1. Remove the separation plate [A] with the spring [B] located under the
separation plate (1 screw).
Lower Separation Roller:
1. Remove the paper feed roller unit from the machine.
2. Remove the front plate [C] of the paper feed section (4 screws).
Lift up then pull out horizontally.
3. Remove the springs [D] on both sides.
4. Remove the separation levers [E] on both sides (1 screw each).
5. Remove the lower separation roller shaft [F].
6. Remove the lower separation roller [G] (Allen screw).
C226
[D]
[F]
5-40
PAPER FEED SECTION
[G]
[C]
[A]
[B]
SM