D Programming In Memory Mode - Icom IC-7200 Advanced Instructions

Previous view
7
MEMORY OPERATION
Memory programming (Continued)
■

D Programming in memory mode

V/M
Push to select the Memory mode.
q
[M-CH] to select the desired memory chan-
Rotate
w
nel.
• If the RIT control indicator lights orange, push
(p. 7-2)
• Memory channel contents appear in the display.
Lower channels
[DIAL] to set the desired frequency, and
Rotate
e
then push
MODE
• To program a blank channel, directly enter the frequen-
cy with the keypad. (p. 3-6)
Hold down
r
MW
frequency and operating mode into the memory
channel.
• 3 beeps sound when memory writing is completed.
RIT control indicator
goes out
Higher channels
to set the operating mode.
for 1 second to write the displayed
[EXAMPLE]: Programming 21.280 MHz/USB
[EXAMPLE]: Programming 21.280 MHz/USB
Memory mode
M-CH/RIT
.
Memory mode
SET
[EXAMPLE]: Programming 21.280 MHz/USB
Memory mode
[EXAMPLE]: Programming 21.280 MHz/USB
Memory mode
Current frequency and mode in channel 18.
New frequency and mode entered
21.280 MHz/USB are now in channel 18.
21.280 MHz/USB are now in channel 18.
21.280 MHz/USB are now in channel 18.
21.280 MHz/USB are now in channel 18.
7-4
into channel 18.
into channel 18.
into channel 18.
into channel 18.
Rotate [M-CH]
MW
Hold down to write
new data into channel 18.
[DIAL] [M-CH]