Operating In The Rtty (Fsk) Mode; D Convenient Functions For Receiving - Icom IC-7200 Advanced Instructions

Previous view
4
RECEIVE AND TRANSMIT

■ Operating in the RTTY (FSK) mode

When using your PC, RTTY terminal or TNC, consult
the manual that comes with the equipment.
F-INP ENT
Hold down
q
band key to select the desired band.
Push to select the RTTY mode.
w MODE
• Hold down MODE
RTTY and RTTY-R modes.
[DIAL] to tune in a desired signal.
Rotate
e
• The S-meter displays received signal strength.
• If the received signal cannot be demodulated, try se-
lecting the opposite mode (RTTY or RTTY-R).
Transmit a SEND signal from your PC or terminal.
r
• " " appears.
• The PO meter displays the transmitted output power.
Use the PC or TNC (TU) to transmit RTTY (FSK)
t
signals.

D Convenient functions for receiving

• Preamp and attenuator (p. 5-3)
P.AMP
Push to turn the preamp ON or OFF.
➥
ATT
• " " appears when the preamp is ON.
P.AMP
Hold down
➥
ATT
tenuator.
• " " appears when the attenuator is ON.
P.AMP
• Push to turn OFF the attenuator.
ATT
• Twin PBT (passband tuning) (p. 5-4)
Rotate [TWIN PBT] (controls–inner/outer).
➥
for 1 second, then push a
BAND
for 1 second to toggle between the
for 1 second to turn ON the at-
Appears while transmitting.
"RTTY" or "RTTY-R" appears.
[TWIN PBT]
4-10
Band keys
[DIAL]