Icom IC-7200 Advanced Instructions page 48

Previous view
4
RECEIVE AND TRANSMIT
■ Operating in the SSB mode
D
Convenient functions for receiving
• AGC (auto gain control) (p. 5-3)
Push once or twice to set the AGC time con-
➥
AGC
stant to fast or slow.
• "F.AGC" appears when the fast time constant is select-
ed, and no icon appears when the slow time constant
is selected.
Hold down
➥
AGC
function OFF.
• "AGC-OFF" appears.
• Noise blanker (p. 5-7)
Push to turn the noise blanker ON or OFF.
NB
➥
• " " appears when the noise blanker is ON.
Hold down
➥ NB
blanker Set mode. Rotate [M-CH] to select the
item, then rotate [DIAL] to adjust the threshold
level, or the blank width.
• Noise reduction (p. 5-8)
Push to turn the noise reduction ON or OFF.
➥ NR
• " " appears when the noise reduction is ON.
Hold down
NR
➥
reduction level Set mode, then rotate [DIAL] to ad-
just the noise reduction level.
• Manual notch filter (p. 5-10)
Push to turn the manual notch filter ON or
➥ MNF
OFF.
• " " appears when the manual notch filter is ON.
Hold down
➥ MNF
notch filter Set mode, then rotate [DIAL] to select
the narrow, mid or wide filter width.
• Auto notch filter (p. 5-9)
ANF
Push
➥
METER
OFF.
• " " appears when the auto notch filter is ON.
(Continued)
for 1 second to turn the AGC
for 1 second to enter the noise
for 1 second to enter the noise
for 1 second to enter the manual
to turn the auto notch filter ON or
4-3
[DIAL]
[M-CH]
[DIAL]
[DIAL]