Activating The Noise Reduction Function; D Setting The Noise Reduction Level - Icom IC-7200 Advanced Instructions

Previous view
5
FUNCTIONS FOR RECEIVE

■ Activating the Noise reduction function

The Noise reduction function enhances desired sig-
nals in the presence of noise by using the DSP circuit
to remove random noise. The amount of enhance-
ment is adjustable.
NR
Push to turn the noise reduction ON or OFF.
➥
• " " appears when the NR function is ON.
The noise reduction level can result in audio signal
masking. Set the noise reduction level for maxi-
mum readability, as shown to the lower right.

D Setting the noise reduction level

NR
Hold down
q
reduction level Set mode.
• Noise reduction is turned ON and "
[DIAL] to set
Rotate
w
tween 0 and 15, in one unit steps.
M-CL
• Hold down
value.
Push to exit the noise reduction Set mode.
e NR
for 1 second to enter the noise
" appears.
the noise reduction level to be-
for 1 second to return to the default
Appears
Noise reduction is OFF
NR Level 0
Noise components
5-8
Noise reduction is ON
NR Level 4 (default)
Desired
signal (CW)
Appears
[DIAL]
4 (default)